research papers on mechanical project

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts

Mechanical engineering articles within Scientific Reports

Article 07 November 2023 | Open Access

Analysis of drilling vibration characteristics of anchoring system in coal mine

•  &  Rendong Nie

Article 06 November 2023 | Open Access

Transformation of foldable robotic hand to scissor-like shape for pinching based on human hand movement

• Hidetoshi Ikeda
•  &  Takumi Saeki

Improved maximum likelihood method for P-S-N curve fitting method with small number specimens and application in T-welded joint

•  &  Hailang Liu

The benefits of haptic feedback in robot assisted surgery and their moderators: a meta-analysis

• Max Bergholz
• , Manuel Ferle
•  &  Bernhard M. Weber

Article 05 November 2023 | Open Access

A time-consistent stabilized finite element method for fluids with applications to hemodynamics

• Dongjie Jia
•  &  Mahdi Esmaily

Article 04 November 2023 | Open Access

Acoustic transmission loss in Hilbert fractal metamaterials

• Gianni Comandini
• , Morvan Ouisse
•  &  Fabrizio Scarpa

Article 03 November 2023 | Open Access

Impacts of morphology parameters on the risk of rupture in intracranial aneurysms: statistical and computational analyses

• Yujing Wang
•  &  Seyyed Amirreza Abdollahi

Effects of filler on the microstructure and corrosion of similar and dissimilar gas inert tungsten arc welding aluminum alloys joints

• Elshafey Ahmed Gadallah
• , Mohamed Ibrahim Abd El Aal
•  &  Hossam Hemdan El-Fahhar

Article 02 November 2023 | Open Access

Study of the effects of bio-silica nanoparticle additives on the performance, combustion, and emission characteristics of biodiesel produced from waste fat

• Ravikumar Jayabal
• , Gopinath Soundararajan
•  &  Nandagopal Kaliappan

Article 01 November 2023 | Open Access

Application of multi-extruded fuel injectors for mixing enhancement of hydrogen gas at scramjet engine: computational study

• Seyyed Amirreza Abdollahi
• , Seyyed Faramarz Ranjbar
•  &  P. D. Uyen

Research on the mathematical model and design of a three loop controller for the oscillating scanning system of a laser line scanning galvanometer

• , Jianying Li
•  &  Wenjie Zhao

Optimizing of particle accelerated rotor parameters using the discrete element method

• , Shizhong Wei
•  &  Shuaiwu Tong

Numerical analysis of pressure drop reduction of bubbly flows through hydrophobic microgrooved channels

• Javane Javaherchian
• , Ali Moosavi
•  &  Seyed Ali Tabatabaei

Article 31 October 2023 | Open Access

Finite-element-analysis of connection strength of assembled camshafts with different cam-bore profiles using tube hydroforming technology

• Jianping Ma
• , Zhansi Jiang
•  &  Jianfeng Rong

Article 30 October 2023 | Open Access

The use of a Mamdani-type fuzzy model for assessing the performance of a boom stabilization systems in a field sprayer

• Zdzisław Kaliniewicz
• , Piotr Szczyglak
•  &  Seweryn Lipiński

A multi-objective optimization design approach of large mining planetary gear reducer

• , Yanyan Zhang
•  &  Huanping Zheng

Article 28 October 2023 | Open Access

Fuel mixing enhancement of transverse coaxial air and fuel jet by upstream shock wave on in scramjet engines: numerical study

• , Moharram Jafari

Article 27 October 2023 | Open Access

Enhancing radiative efficiency in MHD micropumps using plasma-infused hybrid bioconvective nanofluids for advanced radiative oncology at tertiary level

• , A. K. Azad
•  &  Arafat A. Bhuiyan

Development of microcatheter tube extrusion angle estimation system using convolutional neural network segmentation

• Seung Hyun Jeong
• , Sang Heon Lee
•  &  Hong-In Won

Article 26 October 2023 | Open Access

Novel study on enhancing the ignition pattern of waste and inedible feedstock in a modified diesel engine-enhancing its effectiveness as renewable alternative

• , Chidambaranathan Bibin

The second clinical study investigating the surgical method for the kineticomyographic control implementation of the bionic hand

• Mahla Daliri
• , Alireza Akbarzadeh
•  &  Ali Moradi

A modified particle swarm optimization algorithm for a vehicle scheduling problem with soft time windows

• Jinwei Qiao
• , Shuzan Li
•  &  Chi Ma

Article 25 October 2023 | Open Access

Neutron reflectometry under high shear in narrow gap for tribology study

• Naoki Yamashita
• , Tomoko Hirayama
•  &  Norifumi L. Yamada

Article 24 October 2023 | Open Access

Rapid and selective actuation of 3D-printed shape-memory composites via microwave heating

• Soo-Chan An
• , Yeonsoo Lim
•  &  Young Chul Jun

A surface treatment method for improving the attachment of PDMS: acoustofluidics as a case study

• Abdulla Al-Ali
• , Waqas Waheed
•  &  Anas Alazzam

Mechanical superiority of Pseudoxytenanthera bamboo for sustainable engineering solutions

• , Indu Sasidharan
•  &  B. Sabulal

Experimental investigation on fatigue life and tensile strength of carbon fiber-reinforced PLA composites based on fused deposition modeling

• Ehsan Kargar
•  &  Ahmad Ghasemi-Ghalebahman

Article 23 October 2023 | Open Access

Three-dimensional motion control of an untethered magnetic object using three rotating permanent magnets

• Hiroshi Sakuma

Machine learning approach to monitor inkjet jetting status based on the piezo self-sensing

• Thanh Huy Phung
• , Sang Hyeon Park
•  &  Kye-Si Kwon

Wicking assisted condenser platform with patterned wettability for space application

• Tibin M. Thomas
•  &  Pallab Sinha Mahapatra

Establishment of the microstructure of porous materials and its relationship with effective mechanical properties

• Kangni Chen
• , Hongling Qin
•  &  Zhiying Ren

A comparative study of freeze-drying heat transfer in polymeric vials and glass vials

• Morteza Sarmadi
• , Spencer Holmes
•  &  T. N. Thompson

Effective prediction finite element model of pull-out capacity for cast-in-place anchor in high strain rate effects

• Quoc To Bao
• , Kihak Lee
•  &  Jiuk Shin

Analysis of influencing factors on vibration characteristics of electro-hydraulic vibration cutting system

• , Qingshuang Meng
•  &  Bo Li

Article 21 October 2023 | Open Access

Simulation and optimization of the impacts of metal-organic frameworks on the hydrogen adsorption using computational fluid dynamics and artificial neural networks

• Hossein Pourrahmani
• , Mohammad Hadi Mohammadi
•  &  Jan Van herle

Article 20 October 2023 | Open Access

The innovative technology of dough preparation for bread by the accelerated ion–ozone cavitation method

• Auyelbek Iztayev
• , Talgat Kulazhanov
•  &  Madina Yakiyayeva

Characterization of aluminum composite reinforced by silver nanoparticles

• , Gamal El-Din Ali Abu El-Magd
•  &  Ahmed Mohamed Mahmoud Ibrahim

Chaotic vibration control of a composite cantilever beam

• Xiaopei Liu
•  &  Lin Sun

CFD-based design optimization of ducted hydrokinetic turbines

• Jeongbin Park
• , Bradford G. Knight
•  &  Yulin Pan

Comparative study on free vibration analysis of rotating bi-directional functionally graded beams using multiple beam theories with uncertainty considerations

• Moustafa S. Taima
• , Mohamed B. Shehab
•  &  Michael I. Friswell

Acoustic emission-based intelligent identification of piston aero-engine ignition advance angle anomalies

• , Xiaoyang Bi
•  &  Ning Hu

Development of an Operational Digital Twin of a Locomotive Parking Brake for Fault Diagnosis

• Gabriel Davidyan
• , Jacob Bortman
•  &  Ron S. Kenett

Article 19 October 2023 | Open Access

Research on anti-clogging of ore conveyor belt with static image based on improved Fast-SCNN and U-Net

• , Hanquan Zhang
•  &  Dong Xiao

A parametric study on the analysis of thermosolutal convection for magneto-hydrodynamics dependent viscous fluid

• , M. Kamran Alam
•  &  Abdul Baseer Saqib

Article 18 October 2023 | Open Access

Optimal placement criteria of actuators for hybrid mounting system on a non-aligned plate structure

• , Dongwoo Hong
•  &  Byeongil Kim

Random forest method for estimation of brake specific fuel consumption

• Qinsheng Yun
• , Xiangjun Wang
•  &  Haiyan Wang

Kinematic model calibration of a collaborative redundant robot using a closed kinematic chain

• Tadej Petrič
•  &  Leon Žlajpah

Article 17 October 2023 | Open Access

Largely deformable torsional soft morphing actuator created by twisted shape memory alloy wire and its application to a soft morphing wing

• Su-Yeon Lee
•  &  Gil-Yong Lee

Fine conductive line printing of high viscosity CuO ink using near field electrospinning (NFES)

• Md. Khalilur Rahman
• , Jin-Sol Lee

On-site measurement and environmental impact of vibration caused by construction of double-shield TBM tunnel in urban subway

• Zhenyong Wang
• , Yusheng Jiang
•  &  Chenglong Liu

Browse broader subjects

• Engineering

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

• Galvin Library

Mechanical Engineering

• Research Papers & Journal Articles

Finding Research Papers and Journal Articles in Mechanical Engineering

Alphabetical listing.

• Data & Properties
• Codes & Standards
• Product Information
• Resources for Alumni & Others
• Search Tips and Tricks for Reserch Databases
• Research Misconduct

This is a more complete listing of research databases for finding research papers and journal articles. It includes both restricted access subscription databases that are only available to current Illinois Tech students, faculty, and staff as well as some of the best and highest quality free public databases.

• << Previous: Resources for Current Students, Faculty, & Staff
• Next: Data & Properties >>
• Last Updated: Oct 17, 2023 6:10 PM
• URL: https://guides.library.iit.edu/mechanicalengineering

• Proceedings
• Conferences
• Submit Manuscript

Journal of Mechanical Engineering Research

• Abbreviation: J. Mech. Eng. Res.
• Language: English
• ISSN: 2141-2383
• DOI: 10.5897/JMER
• Start Year: 2009
• Published Articles: 119
• Instructions
• Articles In Press

TRNSYS 16: A veritable solar modelling and programming simulation tool used in the design of a continuous solar powered adsorption refrigeration system

July-December 2021 - Vol 12 Num. 2

Project feasibility gave rise to the need for simulation. Simulation of a project leads to reduction in production cost, which ensures the success of the proposed project. Also, it provides initial design data for the experimental project. Thus, the design analysis and variables used for project simulation must be...

• most recent
• most viewed
• most shared
• Sort by: Date

July-December 2021

A. R. Sowunmi, F. O. Anafi, C. O. Folayan,  O. A. Ajayi and  N. O. Omisanya  

• https://doi.org/10.5897/JMER2021.0551
• Article Number: 105DFA568211

Development of a mathematical model to study the impact of state of charge dependent exchange current density on the generated voltage hysteresis of silicon anode-based lithium half cells

January-June 2021

 Al-Mustasin Abir Hossain  

• https://doi.org/10.5897/JMER2021.0543
• Article Number: 6A0131167125

Physics of deactivation of gyroscopic inertial forces

Ryspek Usubamatov and Marek Bergander  

• https://doi.org/10.5897/JMER2020.0530
• Article Number: 5FD5AC066271

Thermal deformation of a thermal shield material vs. method of heat supply

Lyudmila I.  Gracheva  

• https://doi.org/10.5897/JMER2020.0531
• Article Number: ABBD4A465934

Transient thermal analysis of different types of IC engine cylinder fins by varying thickness and introducing slots

A. N. Mohan Das, G. Harish, D. Purrab, J. Sachin and G. Suraj  

• https://doi.org/10.5897/JMER2020.0536
• Article Number: 06CAD7965720

October 2014

Effects of fuel injection discharge curve and injection pressure on upgrading power and combustion parameters in heavy-duty (HD) diesel engine with computational fluid dynamics (CFD) simulation

Saeed Chamehsara, Seyed Mostafa Mirsalim and Mehdi Tajdari

• https://doi.org/10.5897/JMER2014.0333
• Article Number: 70EDB3D48242

November 2013

Optimal maintenance scheduling of thermal power unıts in a restructured nigerian power system

Obodeh, O. and Ugwuoke, P. E.    

• https://doi.org/10.5897/JMER2013.0292
• Article Number: 489439241339

Prediction and optimization of weld bead geometry in gas metal arc welding process using RSM and fmincon

P. Sreeraj, T. Kannan and Subhasis Maji

• https://doi.org/10.5897/JMER2013.0271
• Article Number: 594186641339

Set up Reduction – A perfect way for productivity improvement of computer numerical control (CNC) set up in manufacturing company

Patel Chintan Kumar

• https://doi.org/10.5897/JMER12.003
• Article Number: 7BF784E41340

October 2013

Study of effects of burner configuration and jet dynamics on characteristics of inversed diffusion flames

Hussien Zaky Barakat, Mohamed Refaat Salem, Abdelaziz Morgan and Hany Elsayed Saad          

• https://doi.org/10.5897/JMER2013.0262
• Article Number: 122F70E40069

October 2010

Hot deformation behavior of Nb-V microalloyed steel

  G. R. Ebrahimi, H. Arabshahi and M. Javdani      

• https://doi.org/10.5897/JMER.9000026
• Article Number: 03FFF2E3837

Adhesive bonded single lap and over-lap joints of C/C, C/C-SiC composites and titanium alloy

  V. K. Srivastava Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University, Varanasi- , India.and Shraddha Singh        

• https://doi.org/10.5897/JMER.9000004
• Article Number: BCBF1915174

February 2010

Fractography of compression failed carbon fiber reinforced plastic composite laminates

  M. S. Vinod, , Sunil B. J, Vinay Nayaka, Raghavendra Shenoy, M. S. Murali and A. Nafidi        

• https://doi.org/10.5897/JMER.9000022
• Article Number: 4634A313685

Stick-slip detection through measurement of near field noise

  Nadim A. Emira, Hamzeh T. Mohamad and Montasser S. Tahat    

• https://doi.org/10.5897/JMER.9000042
• Article Number: 89727B35071
• Open Access
• Creative Commons
• CrossMark policy
• Publication Ethics
• Peer Review
• Editorial Policies
• Reviewers Guidelines
• Publication Fees
• Waiver Policy
• Digital Archiving
• Self-Archiving
• Article Copyright
• Visit JMER Facebook Page

Advertisement

• ASME Foundation
• Sections & Divisions
• Back to Main Menu
• Access Benefits
• Communication Preferences
• Digital Downloads
• Purchase History
• Committee History
• Sign In/Create Account
• Publications & Submissions

ASME Journals provide essential resources for engineers looking to keep abreast of the latest research, current theory, practice, and application.

ASME Letters in Dynamic Systems

Online companion guide to asme bpvc, journal of engineering for sustainable building..., journal of autonomous vehicles, journal of nondestructive evaluation, diagnosti..., asme member-only article pack online, journal of engineering for gas turbines and power, journal of pressure vessel technology, journal of manufacturing science and engineering, journal of fluids engineering, journal of turbomachinery, find a journal, more about journals.

High-quality research papers from thought-leaders in all areas of specialization within mechanical engineering are made available through ASME Journals.

Information for Authors

Subscriptions, journal program awards, journal administration.

Let's stay connected.

Download today

ScholarWorks@UMass Amherst

Home > Engineering > MIE > ME_THESES

Mechanical Engineering Masters Theses Collection

Theses from 2023 2023.

Wind-Wave Misalignment Effects on Multiline Anchor Systems for Floating Offshore Wind Turbines , Doron T. Rose, Mechanical Engineering

Theses from 2022 2022

A Simplified Fluid Dynamics Model of Ultrafiltration , Christopher Cardimino, Mechanical Engineering

Local Nanomechanical Variations of Cold-sprayed Tantalum Coatings , Dhrubajyoti Chowdhury, Mechanical Engineering

Aerodynamically Augmented Air-Hockey Pucks , Madhukar Prasad, Mechanical Engineering

Analysis of Low-Induction Rotors for Increased Power Production , Jack E. Rees, Mechanical Engineering

Application of the New IEC International Design Standard for Offshore Wind Turbines to a Reference Site in the Massachusetts Offshore Wind Energy Area , Samuel C. Roach, Mechanical Engineering

Applications of Thermal Energy Storage with Electrified Heating and Cooling , Erich Ryan, Mechanical Engineering

Theses from 2021 2021

Design and Testing of a Foundation Raised Oscillating Surge Wave Energy Converter , Jacob R. Davis, Mechanical Engineering

Wind Turbine Power Production Estimation for Better Financial Agreements , Shanon Fan, Mechanical Engineering

Finite Element Analysis of Impact and Cohesion of Cold Sprayed Particles onto Non-Planar Surfaces , Zhongkui Liu, Mechanical Engineering

Mechanical Design and Analysis: High-Precision Microcontact Printhead for Roll-to-Roll Printing of Flexible Electronics , Mehdi Riza, Mechanical Engineering

Jet Breakup Dynamics of Inkjet Printing Fluids , Kashyap Sundara Rajan, Mechanical Engineering

Ground Source Heat Pumps: Considerations for Large Facilities in Massachusetts , Eric Wagner, Mechanical Engineering

Theses from 2020 2020

Modeling of Electrical Grid Systems to Evaluate Sustainable Electricity Generation in Pakistan , Muhammad Mustafa Amjad, Mechanical Engineering

A Study on Latent Thermal Energy Storage (LTES) using Phase Change Materials (PCMs) 2020 , Ritvij Dixit, Mechanical Engineering

SunDown: Model-driven Per-Panel Solar Anomaly Detection for Residential Arrays , Menghong Feng, Mechanical Engineering

Nozzle Clogging Prevention and Analysis in Cold Spray , Alden Foelsche, Mechanical Engineering

Short Term Energy Forecasting for a Microgird Load using LSTM RNN , Akhil Soman, Mechanical Engineering

Optimization of Thermal Energy Storage Sizing Using Thermodynamic Analysis , Andrew Villanueva, Mechanical Engineering

Fabrication of Binder-Free Electrodes Based on Graphene Oxide with CNT for Decrease of Resistance , Di Zhang, Mechanical Engineering

Theses from 2019 2019

Computational Fluid Dynamics Models of Electromagnetic Levitation Experiments in Reduced Gravity , Gwendolyn Bracker, Mechanical Engineering

Forecasting the Cost of Electricity Generated by Offshore Wind Turbines , Timothy Costa, Mechanical Engineering

Optical-Fiber-Based Laser-Induced Cavitation for Dynamic Mechanical Characterization of Soft Materials , Qian Feng, Mechanical Engineering

On the Fuel Spray Applications of Multi-Phase Eulerian CFD Techniques , Gabriel Lev Jacobsohn, Mechanical Engineering

Topology Network Optimization of Facility Planning and Design Problems , Ravi Ratan Raj Monga, Mechanical Engineering

The Promise of VR Headsets: Validation of a Virtual Reality Headset-Based Driving Simulator for Measuring Drivers’ Hazard Anticipation Performance , Ganesh Pai Mangalore, Mechanical Engineering

Ammonia Production from a Non-Grid Connected Floating Offshore Wind-Farm: A System-Level Techno-Economic Review , Vismay V. Parmar, Mechanical Engineering

Calculation of Scalar Isosurface Area and Applications , Kedar Prashant Shete, Mechanical Engineering

Theses from 2018 2018

Electroplating of Copper on Tungsten Powder , Richard Berdos, Mechanical Engineering

A NUMERICAL FLUTTER PREDICTOR FOR 3D AIRFOILS USING THE ONERA DYNAMIC STALL MODEL , Pieter Boersma, Mechanical Engineering

Streamwise Flow-Induced Oscillations of Bluff Bodies - The Influence of Symmetry Breaking , Tyler Gurian, Mechanical Engineering

Thermal Radiation Measurement and Development of Tunable Plasmonic Thermal Emitter Using Strain-induced Buckling in Metallic Layers , Amir Kazemi-Moridani, Mechanical Engineering

Restructuring Controllers to Accommodate Plant Nonlinearities , Kushal Sahare, Mechanical Engineering

Application and Evaluation of Lighthouse Technology for Precision Motion Capture , Soumitra Sitole, Mechanical Engineering

High Strain Rate Dynamic Response of Aluminum 6061 Micro Particles at Elevated Temperatures and Varying Oxide Thicknesses of Substrate Surface , Carmine Taglienti, Mechanical Engineering

The Effects of Mechanical Loading and Tumor Factors on Osteocyte Dendrite Formation , Wenbo Wang, Mechanical Engineering

Microenvironment Regulates Fusion of Breast Cancer Cells , Peiran Zhu, Mechanical Engineering

Design for Sustainability through a Life Cycle Assessment Conceptual Framework Integrated within Product Lifecycle Management , Renpeng Zou, Mechanical Engineering

Theses from 2017 2017

Improving the Efficiency of Wind Farm Turbines using External Airfoils , Shujaut Bader, Mechanical Engineering

Evaluation Of Impedance Control On A Powered Hip Exoskeleton , Punith condoor, Mechanical Engineering

Experimental Study on Viscoelastic Fluid-Structure Interactions , Anita Anup Dey, Mechanical Engineering

BMI, Tumor Lesion and Probability of Femur Fracture: a Probabilistic Biomechanics Approach , Zhi Gao, Mechanical Engineering

A Magnetic Resonance Compatible Knee Extension Ergometer , Youssef Jaber, Mechanical Engineering

Non-Equispaced Fast Fourier Transforms in Turbulence Simulation , Aditya M. Kulkarni, Mechanical Engineering

INCORPORATING SEASONAL WIND RESOURCE AND ELECTRICITY PRICE DATA INTO WIND FARM MICROSITING , Timothy A. Pfeiffer, Mechanical Engineering

Effects of Malformed or Absent Valves to Lymphatic Fluid Transport and Lymphedema in Vivo in Mice , Akshay S. Pujari, Mechanical Engineering

Electroless Deposition & Electroplating of Nickel on Chromium-Nickel Carbide Powder , Jeffrey Rigali, Mechanical Engineering

Numerical Simulation of Multi-Phase Core-Shell Molten Metal Drop Oscillations , Kaushal Sumaria, Mechanical Engineering

Theses from 2016 2016

Cold Gas Dynamic Spray – Characterization of Polymeric Deposition , Trenton Bush, Mechanical Engineering

Intent Recognition Of Rotation Versus Translation Movements In Human-Robot Collaborative Manipulation Tasks , Vinh Q. Nguyen, Mechanical Engineering

A Soft Multiple-Degree of Freedom Load Cell Based on The Hall Effect , Qiandong Nie, Mechanical Engineering

A Haptic Surface Robot Interface for Large-Format Touchscreen Displays , Mark Price, Mechanical Engineering

Numerical Simulation of High Velocity Impact of a Single Polymer Particle during Cold Spray Deposition , Sagar P. Shah, Mechanical Engineering

Tunable Plasmonic Thermal Emitter Using Metal-Coated Elastomeric Structures , Robert Zando, Mechanical Engineering

Theses from 2015 2015

Thermodynamic Analysis of the Application of Thermal Energy Storage to a Combined Heat and Power Plant , Benjamin McDaniel, Mechanical Engineering

Towards a Semantic Knowledge Management Framework for Laminated Composites , Vivek Premkumar, Mechanical Engineering

A CONTINOUS ROTARY ACTUATION MECHANISM FOR A POWERED HIP EXOSKELETON , Matthew C. Ryder, Mechanical Engineering

Optimal Topological Arrangement of Queues in Closed Finite Queueing Networks , Lening Wang, Mechanical Engineering

Creating a New Model to Predict Cooling Tower Performance and Determining Energy Saving Opportunities through Economizer Operation , Pranav Yedatore Venkatesh, Mechanical Engineering

Theses from 2014 2014

New Generator Control Algorithms for Smart-Bladed Wind Turbines to Improve Power Capture in Below Rated Conditions , Bryce B. Aquino, Mechanical Engineering

UBOT-7: THE DESIGN OF A COMPLIANT DEXTEROUS MOBILE MANIPULATOR , Jonathan Cummings, Mechanical Engineering

Design and Control of a Two-Wheeled Robotic Walker , Airton R. da Silva Jr., Mechanical Engineering

Free Wake Potential Flow Vortex Wind Turbine Modeling: Advances in Parallel Processing and Integration of Ground Effects , Nathaniel B. Develder, Mechanical Engineering

Buckling of Particle-Laden Interfaces , Theo Dias Kassuga, Mechanical Engineering

Modeling Dynamic Stall for a Free Vortex Wake Model of a Floating Offshore Wind Turbine , Evan M. Gaertner, Mechanical Engineering

An Experimental Study of the C-Start of a Mechanical Fish , Benjamin Kandaswamy Chinna Thambi, Mechanical Engineering

Measurement and Verification - Retro-Commissioning of a LEED Gold Rated Building Through Means of an Energy Model: Are Aggressive Energy Simulation Models Reliable? , Justin M. Marmaras, Mechanical Engineering

Development of a Support Structure for Multi-Rotor Wind Turbines , Gaurav Murlidhar Mate, Mechanical Engineering

Towards Accessible, Usable Knowledge Frameworks in Engineering , Jeffrey Mcpherson, Mechanical Engineering

A Consistent Algorithm for Implementing the Space Conservation Law , Venkata Pavan Pillalamarri Narasimha Rao, Mechanical Engineering

Kinetics of Aluminization and Homogenization in Wrought H-X750 Nickel-Base Superalloy , Sean Reilly, Mechanical Engineering

Single-Phase Turbulent Enthalpy Transport , Bradley J. Shields, Mechanical Engineering

CFD Simulation of the Flow around NREL Phase VI Wind Turbine , Yang Song, Mechanical Engineering

Selection of Outputs for Distributed Parameter Systems by Identifiability Analysis in the Time-scale Domain , Teergele, Mechanical Engineering

The Optimization of Offshore Wind Turbine Towers Using Passive Tuned Mass Dampers , Onur Can Yilmaz, Mechanical Engineering

Design of a Passive Exoskeleton Spine , Haohan Zhang, Mechanical Engineering

TURBULENT TRANSITION IN ELECTROMAGNETICALLY LEVITATED LIQUID METAL DROPLETS , Jie Zhao, Mechanical Engineering

Theses from 2013 2013

Optimization of Mixing in a Simulated Biomass Bed Reactor with a Center Feeding Tube , Michael T. Blatnik, Mechanical Engineering

Continued Development of a Chilled Water System Analysis Tool for Energy Conservation Measures Evaluation , Ghanshyam Gaudani, Mechanical Engineering

Application of Finite Element Method in Protein Normal Mode Analysis , Chiung-fang Hsu, Mechanical Engineering

Asymmetric Blade Spar for Passive Aerodynamic Load Control , Charles Mcclelland, Mechanical Engineering

Background and Available Potential Energy in Numerical Simulations of a Boussinesq Fluid , Shreyas S. Panse, Mechanical Engineering

Techno-Economic Analysis of Hydrogen Fuel Cell Systems Used as an Electricity Storage Technology in a Wind Farm with Large Amounts of Intermittent Energy , Yash Sanghai, Mechanical Engineering

Multi Rotor Wind Turbine Design And Cost Scaling , Preeti Verma, Mechanical Engineering

Activity Intent Recognition of the Torso Based on Surface Electromyography and Inertial Measurement Units , Zhe Zhang, Mechanical Engineering

Theses from 2012 2012

Simulations of Non-Contact Creep in Regimes of Mixed Dominance , Maija Benitz, Mechanical Engineering

Techniques for Industrial Implementation of Emerging Semantic Technologies , Jay T. Breindel, Mechanical Engineering

Environmental Impacts Due to Fixed and Floating Offshore Wind Turbines , Micah K. Brewer, Mechanical Engineering

Physical Model of the Feeding Strike of the Mantis Shrimp , Suzanne M. Cox, Mechanical Engineering

Investigating the Relationship Between Material Property Axes and Strain Orientations in Cebus Apella Crania , Christine M. Dzialo, Mechanical Engineering

A Multi-Level Hierarchical Finite Element Model for Capillary Failure in Soft Tissue , Lu Huang, Mechanical Engineering

Finite Element Analysis of a Femur to Deconstruct the Design Paradox of Bone Curvature , Sameer Jade, Mechanical Engineering

Vortex-Induced Vibrations of an Inclined Cylinder in Flow , Anil B. Jain, Mechanical Engineering

Experimental Study of Stability Limits for Slender Wind Turbine Blades , Shruti Ladge, Mechanical Engineering

Semi-Active Damping for an Intelligent Adaptive Ankle Prosthesis , Andrew K. Lapre, Mechanical Engineering

A Finite Volume Approach For Cure Kinetics Simulation , Wei Ma, Mechanical Engineering

Effect of Slip on Flow Past Superhydrophobic Cylinders , Pranesh Muralidhar, Mechanical Engineering

High Speed Flow Simulation in Fuel Injector Nozzles , Sukanta Rakshit, Mechanical Engineering

A Nonlinear Model for Wind-Induced Oscillations of Trees , Lakshmi Narayanan Ramanujam, Mechanical Engineering

Vibration Reduction of Offshore Wind Turbines Using Tuned Liquid Column Dampers , Colin Roderick, Mechanical Engineering

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Login for Faculty Authors
• Faculty Author Gallery
• Expert Gallery
• University Libraries
• Mechanical and Industrial Engineering Webpage
• UMass Amherst

This page is sponsored by the University Libraries.

© 2009 University of Massachusetts Amherst • Site Policies

Privacy Copyright

• Browse Works
• Engineering

Mechanical Engineering

Research papers/topics in mechanical engineering, basic principle of machining and arc welding.

ABSTRACT This project tittle ‘’basic principle of machining’’ deal with the operations on lathe, milling and some part of arc welding, turning, taper turning, threading, knurling and chamfering, while on milling machine spur Gears were cut, forming a hexagon shape and square shape were all done on milling machine. A simple component/part which contained all the above mention operation were produced in one work piece. In conclusion we are able to produce spurs gears, square thread, an...

Design and Development of a Hybrid Bicycle

This project involved the conversion of a conventional bicycle into an electric hybrid bicycle using a hub motor, battery, controller, throttle, and battery indicator. The selection of a flywheel-based regenerative mechanism was justified based on its superior energy storage capabilities. The challenges faced during the assembly, including bearing and clutch drive iterations, were overcome through the use of multiple bearings, metal casting, and welding. The implementation of an indirect...

Multi-function e-scarecrow (MFeSC)

Humans have taken the (scarecrow) as a protector for these crops from the birds. There are various different types and designs for the scarecrows around the world. In this project we will develop the traditional scarecrows to become electronic and do more than one function at the same time (Multi-functions mechanism) .The (MFESC) consists of several components, the most important of them is the sensor, which performs many functions, including sensing the presence of birds’ sounds, as well a...

How Mechanical Engineering can Proffer Solution to the Economic and Political Situation in Nigeria

The process passed through in the production of marble through different species..

CASE STUDY: ONSHORE FRONTIER LIMITED ❖Marble ❖The process passed through in the production of marble times through different species. AND Machines and processes involved in the production of marble tiles.

Optimize the Operational Parameters through Simulation to Increase the Efficiency of Combined Cycle Power Plants

ABSTRACT  Electric power generation is one of the important factors for the development of peoples and can take an advantage of energy extraction technology of combined cycle in Sudan, which is highly effective in the States instead of remote power generation and combined cycle power plant also be economically feasible for use in sugar refineries in Sudan. . The purpose of this study is to find the maximum efficiency and minimum cost of power generation in combined cycle power plant by simul...

Design Analysis of HCCI Engine Piston

The piston is a heart of the engine and its working condition is the most exceedingly bad one of the key parts of the engine in the workplace. A piston is a segment of responding piston, responding pumps, gas compressors and pneumatic chambers, among other comparative systems. It is the moving part that is contained by a barrel and is made gas-tight by piston rings. In a piston, its motivation is to exchange force from growing gas in the barrel to the crankshaft through a piston bar and addit...

Energy and Exergy Analysis of Boiler Systems

ABSTRACT  In this work, the results of the analysis of the NBC boiler plant using energetic and exergetic methods are presented. The main aim of this study is to investigate the effects of boiler rotary burner cup speed, oil nozzle size, excess air and fuel types on its performance and emissions with a view to identifying and quantifying components having greatest losses of energy and exergy efficiencies. Optimization of the boiler operating system is also carried out. The specific objective...

Exergetic Efficiency of Passive Solar Air Heater with Phase Change Energy Storage Material

ABSTRACT  Energy and exergy analysis of solar air heater with phase change material energy storage is considered in this research work. Energy and exergy models for component systems like flat plate solar collector and phase change material in one-dimensional heat conduction in a cylindrical pipe, for storing periods were obtained. Exergy analysis, which is based on the second law of thermodynamics, and energy analysis, which is based on first law, was applied to improve system efficiency. M...

Fracture Mechanics of Glass Fibre Reinforced Polyester Composites (Gfrp) Subjected to Impact Load

ABSTRACT Glass mat reinforcement, which can be easily shattered, is widely used across the world in military, automobile, civil, railway and electronic engineering among others. This research investigated the fracture mechanics of reinforced polyester composites on exposure to sudden impact force, using experimental and analytical methods based on impact and Linear Elastic Fracture Mechanics (LEFM) test procedures, to study the stress distribution around crack tip and zone. Plies of randomly...

Use of Finite Time Thermodynamic Simulation of Performance of an Otto Cycle with Variable Specific Heats of Working Fluid

Abstract  A finite time thermodynamic modelling and simulation of irreversible Otto cycle engines has been developed taking into account the variability of specific heats for working fluid due to temperature variation. The effect of three different parameters on the engine was discussed, which are: the internal irreversibility, the heat losses and the friction losses. A program was developed by using MATLAB software to perform the necessary calculations of thermodynamic model. According to t...

Effect of Delay Period on Performance of Compression Engine Running on Jatropha Fuel

Abstract Jatropha Biodiesel was tested in a single cylinder direct-injection, water cooled diesel engine to investigate the operational parameters of a small capacity diesel engine under five engine loads, constant speed test. The jatropha oil is used as a non edible oil to produce the biodiesel. The investigated blends were B0, B25, B50, B75 and B100, where (B#) denotes bio-diesel fuel volume percentage in diesel oil. The jatropha biodiesel was prepared locally in Sudan, specifications of wh...

Design and Construction of a Machine for the Production of Pulverized Coal-Rice Husk Briquettes

ABSTRACT The first part was the design and construction of a machine model using wood and the second part w pulverized coal-rice husk briquettes. The dt find the different loads due to shear stress on varlous parts or the nlachlne as the materials flow during consolidation. The loads obtained were used to dimension gears, shafts and pulleys that form the power transmission system of the machine. The machine was then drawn to produce a detail dimensional model in software form using AutoCAD. A...

Optimum Buckling Response Model of Grp Composites

ABSTRACT Relevant literature for the modeling and analysis of failure of GRP composites were reviewed. Samples of GRP composites were prepared by hand-lay up. Composites samples were subjected to compressive tests using a tensometer. Mechanical characteristics, such as modulus of elasticity; compressive strength, proportionality limit, elastic limit and critical strain of composites were evaluated from compression tests results. It was found that the compressive strength of all the samples is...

Improvement of the Performance of Thermal Power Systems Through Energy and Exergy Analysis

ABSTRACT This research work is aimed at using the energy and exergy analysis with thermodynamic data to suggest improvements in the performance of steam and gas turbine power plants. In this regard, specific data from Egbin steam power plant and Geregu I gas turbine power plant were used for the analysis. In the analysis, scientific tools such as Engineering Equation Solver (EES) programme with built-in functions for most thermodynamic and transport properties was used to calculate the enthal...

Mechanical Engineering is branch of engineering that deals with the design, construction, and use of machines Afribary curates list of academic papers and project topics in Mechanical Engineering. You can browse mechanical engineering project topics, mechanical engineering seminar topics, mechanical engineering thesis, Assignments, Termpapers etc

Popular Papers/Topics

Design & construction of hammer mill machine, design and construction of a refrigerator, design and construction of a mobile refrigerator, design and fabrication of an ice block making machine, construction of grain grinding machine, the design and fabrication of an electric popcorn frying machine, design and fabrication of a dust extractor, report on construction of nylon sealing and cutting machine., construction of an electrical stove with three-oven apartment, the design and fabrication of a iron shelling machine, the construction and fabrication of a candle moulding machine, design and implementation of simple scientific calculator., design and construction of motorised wheel barrow, construction of packed distillation column, fabrication of a polythiene bag sealing and cutting machine.

• Chat on WhatsApp
• Knowledge Base

Privacy Policy | Refund Policy | Terms | Copyright | © 2023, Afribary Limited. All rights reserved.

Mechanical Engineering & Mechanics Open Access Journals

Our open access Journals in Mechanical Engineering & Mechanics cover topics such as Modelling and Simulation, Mechanical and Materials Engineering, Friction, Mechanics of Advanced Materials, and Visualization in Engineering, to name a few.  Find a list of all journals here: 

Advanced Modeling and Simulation in Engineering Sciences

The journal covers the vast domain of the advanced modeling and simulation of materials, processes, and structures governed by the laws of mechanics. 

More about the journal  | Read all articles |  Submission guidelines

Chinese Journal of Mechanical Engineering

CJME mainly contains articles which study the basic theories and their applications in the field of mechanical engineering. 

The journal covers all aspects of theoretical and experimental research works related to friction, lubrication, wear, surface engineering and basic sciences. 

International Journal of Advanced Structural Engineering

The aim of the journal is to provide a unique forum for the publication and rapid dissemination of original research on structural engineering. 

More about the journal  | Read all articles | Submission guidelines

International Journal of Concrete Structures and Materials

The journal covers various topics related to concrete, concrete structures and other allied materials 

International Journal of Mechanical and Materials Engineering

The journal provides a forum for cross-disciplinary research contributions covering a broad spectrum of issues pertaining to the mechanical and machining properties of materials as well as materials science.

Mechanics of Advanced Materials and Modern Processes

The journal publishes results of current analytical, experimental and numerical research in the broad area of mechanics of advanced materials, with a special emphasis on underpinning interrelations between physics of deformation, damage, and fracture with mechanics of manufacturing processes. 

Micro and Nano Systems Letters

The journal offers an express online publication of short research papers containing the latest advances in micro and nano-scaled devices and systems.  

Visualization in Engineering

The journal publishes original research results regarding visualization paradigms, models, technologies, and applications that contribute significantly to the advancement of engineering in all branches. 

Not sure which open access journal is the most suitable one for your manuscript? Try our Journal Suggester, and don't forget to select "Fully Open Access journals". 

• Project Topics
• Project Topics Materials
• Project topics in education
• Accounting project topics
• Computer science project topics
• Project topics for mass communication
• Project topics for Marketing
• Project topics for business administration
• Project topics in economics

• REQUEST PROJECT
• HIRE A WRITER
• SCHOLARSHIPS

Project By Departments

• Agric Engineering
• Agriculture
• Architecture
• Banking And Finance
• BioChemistry
• Building Technology
• Business Administration
• Chemical Engineering
• Civil Engineering
• Computer Engineering
• Computer Science
• Cooperative And Rural Development
• Cooperative Economics
• Design And Technology
• Electrical Electronic Engineering
• Entrepreneurial And Business Management
• Estate Management
• Fine And Applied Arts
• Food Technology
• Health Science And Technology
• Home And Rural Economics
• Hospitality Management And Technology
• Industrial Chemistry
• Industrial Relation and Personnel Management
• International And Diplomatic Studies
• Library And Information Science
• Mass Communication
• Mechanical Engineering
• Medical And Health Science
• Microbiology
• Nursing Science
• Office Technology and Management
• Political Science
• Printing Technology
• Public Administration
• Public Relations And Communication
• Purchasing And Supply
• Quantity Surveyor
• Science Lab Technology
• Secretarial Administration
• Staff Development And Distance Education
• Urban And Regional Planning
• Thesis and Dissertation

Free Mechanical Engineering Project Topics

Discover a wide range of Free Mechanical Engineering Project topics for your final year research paper. Choose from our extensive list of Mechanical Engineering project topics and download the materials instantly.

We offer prompt delivery of reliable and comprehensive Mechanical Engineering research materials listed on our website. Find complete and ready-made Mechanical Engineering project work for your academic needs.

Explore fresh Mechanical Engineering Project ideas or conduct a search for related projects using our convenient search box. Our project materials collection caters to students pursuing ND, HND, BSc, MSc, PGD, and Phd degrees. Access our list of Mechanical Engineering Project topics in PDF and Word formats for easy reference.

1 .  Construction Of A Portable Refrigerator

2 .  modern washing machine, principles of operation and maintenance, 3 .  design and fabrication of electrical motorized bicycle wheelchair, 4 .  design and evaluation of pediatric gait rehabilitation robots, 5 .  repair of a damaged air conditioner in engr. ayogu and okpe’, 6 .  repair of a damaged refrigerator 2, 7 .  repair and rehabilitation of a faulty air conditioner, 8 .  design and fabrication of a pilot production plant for p (1), 9 .  design and construction of a woodlathe machine 2 (2), 10 .  design and construction of a spin dryerdesign and construction of a spin dryer, 11 .  constructoin of an open steam distillatoin column, 12 .  construction of two face gas burnerconstruction of two face gas burner, 13 .  the design and fabrication of a, 14 .  design and fabrication of a printing i block machine, 15 .  the design and fabrication of mechanical, 16 .  design and construction of mitchell tilting pad apparatus, 17 .  fabrication of a standard waeel barrow, 18 .  the detail fabrication of a candle moulding machine, 19 .  the design and fabrication of mechanical lawn mower, 20 .  repair of an airconditioner in mechanical engineering department.

Page 1 of 3

Be the First to Share On Social

LATEST PROJECT TOPICS

• Scholarships
• Download Projects
• Bank Details
• Free Data/Airtime
• Terms and Condition
• Sim hosting
• Back to Top
• Privacy Policy      RSS Feeds

• Centerline Archive
• CBE in the News
• Livable Buildings Awards

CBE Unveils Renovated Controlled Environment Chamber, Expanding Future Research

David Lehrer November 6, 2023

Categories: Organization Events HVAC Research IEQ

Tags: #CBE staff #HVAC research #thermal comfort #IEQ #events

Since opening in 1988, CBE’s controlled environment chamber has been used for research that has produced hundreds of journal papers, including keystone work related to human response, indoor environments and mechanical systems in buildings and automobile cabins. A major renovation was completed this fall, updating obsolete systems and failing equipment that was hindering important research operations. This milestone was commemorated last month, with a ribbon cutting ceremony held during a happy hour before CBE’s fall Industry Advisory Board meeting. Research Specialist Charlie Huizenga , who managed the project for CBE, gave a presentation on the chamber’s history and the upgrades. Attendees also learned a less familiar history, describing how the launch of this facility led to a noteworthy romance (more on that later). The upgrade design and construction administration were done by David Heinzerling of CBE Industry Partner Taylor Engineers.

(L to R) David Heinzerling of Taylor Engineers, CBE Director Edward Arens, and Ippei Izuhara of Sanken at the October ribbon cutting ceremony.

With its recent upgrade, the Berkeley facility is one of the most advanced test chambers of its type. The two external walls use a double wall design that allows conditioned air to be circulated behind the inside surface, so the temperature of the interior glass and walls can be controlled independently of the room temperature. Both the ceiling and underfloor spaces can be used as supply or return plenums. The upgrade added radiant ceiling panels, donated along with additional financial support by CBE Industry Partner Sanken , to create a new range of study capabilities. The upgrade also included a humidifier, control software from Automated Logic Corporation, and controllable LED lighting dimmable to one percent, with adjustable color temperature, fixture-integrated occupancy sensors and networked controls.

While the chamber was initially being constructed, the research team led by Fred Bauman learned about the evolving underfloor air distribution (UFAD) technology, and connected with Geno Brager , who was a supplier for Tate Access Floor and eventually donated the raised floor that was installed in the chamber. At the time, Prof. Gail (Schiller) Brager had recently begun her academic career at UC Berkeley’s Building Science Group, and met Geno for the first time literally inside the chamber. To make a long story short, they had an instant connection, and have now been happily married for over 30 years.

Romances aside, many of the early activities surrounding the chamber led to far-reaching research results. Tate Access Floor later became one of CBE’s founding industrial partners, and this collaboration led to studies in the chamber, plus field studies and simulations, that produced UFAD design tools and papers, and two editions of the UFAD Design Guide . A chamber-based dissertation study with human subjects by Hui Zhang led to seminal work on thermal comfort and the development of the Advanced Berkeley Comfort Model . The chamber has been used for studies on personal comfort devices , fans of all types , automotive cabin conditioning , window views and more.

With the renovation complete, CBE is excited to be embarking on a long list of planned experiments. A new study is underway on the effects of age and sex on thermal comfort, with support and participation of CBE Industry Partner Arup . We have also begun studies to improve our understanding of the design and operation of a convection-enhanced radiant panel used in combination with a dedicated outdoor air supply (DOAS) for heating and cooling, developed by Industry Partner Sanken . These are just a few examples of research that will take advantage of this upgraded facility, and we look forward using it while pursuing new directions in collaboration with CBE consortium members and with research affiliates here at UC Berkeley and further afield.

Photo at top: Research team members Ying Li, Akihisa Nomoto and Xue Zhai configure measurement equipment in the chamber.

• Faculty and Staff
• Visiting Scholars
• Visiting Scholar Program
• Graduate Programs
• Indoor Environmental Quality
• HVAC Systems
• Facade Systems
• Human Interactions
• Building Decarbonization
• Industry Partners (Industry Advisory Board)
• Joining CBE
• Benefits of Membership
• Partner Advisory Board Meetings
• Partner Login
• Publications
• CBE Occupant Survey
• Upcoming Events
• Past CBE Events

• HIRE A WRITER
• AUTHORISED AGENCIES

MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS

Mechanical engineering project topics and materials for undergraduate and post graduate students. research project paper, download seminar topics, proposals, titles, ideas and materials are available for dissertation, thesis and essay in mechanical engineering department. find below the list of research project topics for ond, hnd, bsc, pgd, msc and phd mechanical engineering students., latest projects, the lending constraints of nigerian commercial banks, the problem and prospect of capital mobilization in financing small industries, the role of the community banks in the development of rural economy, the role of money market in the nigerian economy, performance and the profitability of a firm, departments.

• ACCOUNTING PROJECT TOPICS AND MATERIALS 3488
• EDUCATION PROJECT TOPICS AND MATERIALS 3483
• ENGLISH AND LINGUISTIC PROJECT TOPICS AND MATERIALS 2889
• BUSINESS ADMINISTRATION PROJECT TOPICS AND MATERIALS 1235
• COMPUTER SCIENCE PROJECT TOPICS AND MATERIALS FINAL YEAR 1104
• EDUCATION FOUNDATION GUIDANCE AND COUNSELLING TOPICS AND MATERIALS 1039
• ZOOLOGY PROJECT TOPICS AND MATERIALS 1002
• MASS COMMUNICATION PROJECT TOPICS AND MATERIALS 1000
• ANIMAL SCIENCE PROJECT TOPICS AND MATERIALS 978
• BANKING AND FINANCE PROJECT TOPICS AND MATERIALS 907
• LAW PROJECT TOPICS AND MATERIALS 896
• ARTS EDUCATION PROJECT TOPICS AND MATERIALS 845
• MARKETING PROJECT TOPICS AND MATERIALS 689
• PUBLIC ADMINISTRATION PROJECT TOPICS AND MATERIALS 654
• AGRICULTURAL EXTENSION PROJECT TOPICS AND MATERIALS 646
• POLITICAL SCIENCE PROJECT TOPICS AND MATERIALS 565
• ECONOMICS PROJECT TOPICS AND MATERIALS 450
• LIBRARY SCIENCE PROJECT TOPICS AND MATERIALS 444
• AGRICULTURAL SCIENCE PROJECT TOPICS AND MATERIALS 432
• CIVIL ENGINEERING PROJECT TOPICS AND MATERIALS 426
• ENGLISH EDUCATION PROJECT TOPICS AND MATERIALS 421
• BIOCHEMISTRY PROJECT TOPICS AND MATERIALS 390
• ENVIRONMENTAL SCIENCE PROJECT TOPICS AND MATERIALS 344
• SCIENCE LABORATORY TECHNOLOGY PROJECT TOPICS AND MATERIALS 324
• ESTATE MANAGEMENT PROJECT TOPICS AND MATERIALS 298
• OFFICE TECHNOLOGY PROJECT TOPICS AND MATERIALS 288
• MANAGEMENT PROJECT TOPICS AND MATERIALS 288
• CO-OPERATIVE ECONOMICS PROJECT TOPICS AND MATERIALS 276
• PUBLIC HEALTH PROJECT TOPICS AND MATERIALS 276
• PURCHASING AND SUPPLY PROJECT TOPICS AND MATERIALS 267
• HISTORY AND INTERNATIONAL STUDIES PROJECT TOPICS AND MATERIALS 240
• GUIDANCE AND COUNSELLING PROJECT TOPICS AND MATERIALS 240
• NURSING PROJECT TOPICS AND MATERIALS 232
• MICROBIOLOGY PROJECT TOPICS AND MATERIALS 226
• ELECTRICAL ELECTRONICS PROJECT TOPICS AND MATERIALS 225
• STATISTICS PROJECT TOPICS AND MATERIALS 207
• HUMAN RESOURCES MANAGEMENT PROJECT TOPICS AND MATERIALS 205
• VOCATIONAL AND TECHNICAL EDUCATION PROJECT TOPICS AND MATERIALS 202
• CHEMICAL ENGINEERING PROJECT TOPICS AND MATERIALS 175
• SECRETARIAL ADMINISTRATION PROJECT TOPICS AND MATERIALS 167
• FOOD SCIENCE TECHNOLOGY PROJECT TOPICS AND MATERIALS 161
• SOCIOLOGY PROJECT TOPICS AND MATERIALS 159
• AGRICULTURAL ECONOMICS PROJECT TOPICS AND MATERIALS 158
• MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS 151
• BUSINESS MANAGEMENT PROJECT TOPICS AND MATERIALS 150
• BIOLOGY PROJECT TOPICS AND MATERIALS 148
• PSYCHOLOGY PROJECT TOPICS AND MATERIALS 147
• ENTREPRENEURIAL PROJECT TOPICS AND MATERIALS 146
• URBAN AND REGIONAL PLANNING PROJECT TOPICS AND MATERIALS 146
• INSURANCE PROJECT TOPICS AND MATERIALS 142
• SCIENCE EDUCATION PROJECT TOPICS AND MATERIALS 135
• BUILDING TECHNOLOGY PROJECT TOPICS AND MATERIALS 130
• GEOGRAPHY PROJECT TOPICS AND MATERIALS 126
• PHILOSOPHY PROJECT TOPICS AND MATERIALS 116
• HEALTH AND PHYSICAL EDUCATION PROJECT TOPICS AND MATERIALS 114
• CRIMINOLOGY PROJECT TOPICS AND MATERIALS 111
• TAXATION PROJECT TOPICS AND MATERIALS 110
• COMPUTER ENGINEERING PROJECT TOPICS AND MATERIALS 110
• CHEMISTRY PROJECT TOPICS AND MATERIALS 107
• TOURISM AND HOSPITALITY MANAGEMENT PROJECT TOPICS AND MATERIALS 105
• SMES AND ENTREPRENEURSHIP PROJECT TOPICS AND MATERIALS 104
• QUANTITY SURVEYING PROJECT TOPICS AND MATERIALS 100
• HOME ECONOMICS PROJECT TOPICS AND MATERIALS 98
• BIBLICAL AND THEOLOGY PROJECT TOPICS AND MATERIALS 97
• GEOLOGY PROJECT TOPICS AND MATERIALS 97
• FINE ART PROJECT TOPICS AND MATERIALS 93
• EDUCATION FOUNDATION GUIDANCE AND COUNSELLING 91
• FRENCH PROJECT TOPICS AND MATERIALS 76
• HEALTH AND SEX EDUCATION PROJECT TOPICS AND MATERIALS 73
• INDUSTRIAL CHEMISTRY PROJECT TOPICS AND MATERIALS 73
• OCCUPATION HEALTH AND SAFETY PROJECT TOPICS AND MATERIALS 70
• SOIL SCIENCE PROJECT TOPICS AND MATERIALS 69
• THEATER ARTS PROJECT TOPICS AND MATERIALS 68
• ARCHITECTURE PROJECT TOPICS AND MATERIALS 68
• FISHERY AND AQUACULTURE PROJECT TOPICS AND MATERIALS 67
• PHARMACY PROJECT TOPICS AND MATERIALS 66
• MARINE AND TRANSPORT MANAGEMENT PROJECT TOPICS AND MATERIALS 65
• HEALTH AND KINETICS PROJECT TOPICS AND MATERIALS 63
• OIL AND GAS PETROLEUM ENGINEERING PROJECT TOPICS AND MATERIALS 62
• PHYSICS PROJECT TOPICS AND MATERIALS 62
• RELIGIOUS AND CULTURAL STUDIES PROJECT TOPICS AND MATERIALS 56
• PETROLEUM ENGINEERING PROJECT TOPICS AND MATERIALS 56
• INTERNAL INSTITUTE OF JOURNALISM / RELATION / HISTORY AND DIPLOMACY PROJECT TOPICS AND MATERIALS 55
• INDUSTRIAL RELATION AND PERSONNEL MANAGEMENT PROJECT TOPICS AND MATERIALS 49
• AGRICULTURAL ENGINEERING PROJECT TOPICS AND MATERIALS 49
• BUSINESS EDUCATION PROJECT TOPICS AND MATERIALS 49
• FOOD NUTRITION PROJECT TOPICS AND MATERIALS 48
• COMMERCE PROJECT TOPICS AND MATERIALS 47
• SCIENCE PROJECT TOPICS AND MATERIALS 43
• TERM PAPER 41
• ISLAMIC AND ARABIC PROJECT TOPICS AND MATERIALS 38
• CHILD AND BASIC EDUCATION PROJECT TOPICS AND MATERIALS 34
• AFRICAN LANGUAGES PROJECT TOPICS AND MATERIALS 32
• PRODUCTION AND OPERATION MANAGEMENT PROJECT TOPICS AND MATERIALS 30
• VETERINARY PROJECT TOPICS AND MATERIALS 30
• MATHEMATICS PROJECT TOPICS AND MATERIALS 29
• PEACE STUDIES AND CONFLICT RESOLUTION PROJECT TOPICS AND MATERIALS 27
• BOTANY AND ECOLOGY PROJECT TOPICS AND MATERIALS 26
• GENERAL EDUCATION PROJECT TOPICS AND MATERIALS 25
• SOCIAL STUDIES EDUCATION 24
• ASSIGNMENT 24
• NAUTICAL SCIENCE PROJECT TOPICS AND MATERIALS 20
• FORESTRY WILD LIFE PROJECT TOPICS AND MATERIALS 17
• PLANT SCIENCE PROJECT TOPICS AND MATERIALS 17
• RADIATION PROJECT TOPICS AND MATERIALS 17
• CROP SCIENCE PROJECT TOPICS AND MATERIALS 16
• PHYSICS EDUCATION PROJECT TOPICS AND MATERIALS 16
• PHYSICAL SCIENCE PROJECT TOPICS AND MATERIALS 15
• CURRICULUM AND EDUCATION PROJECT TOPICS AND MATERIALS 13
• MEDICAL BIOLOGY PROJECT TOPICS AND MATERIALS 13
• ANATOMY PROJECT TOPICS AND MATERIALS 13
• MUSIC PROJECT TOPICS AND MATERIALS 13
• ACTUARIAL SCIENCE PROJECT TOPICS AND MATERIALS 12
• PROJECT MANAGEMENT PROJECT TOPICS AND MATERIALS 10
• AGRICULTURAL AND BIORESOURCES ENGINEERING PROJECT TOPICS AND MATERIALS 10
• MEDICINE AND SURGERY PROJECT TOPICS AND MATERIALS 9
• SPORT PROJECT TOPICS AND MATERIALS 6
• BREWING SCIENCE PROJECT TOPICS AND MATERIALS 5
• GEOGRAPHY EDUCATION PROJECT TOPICS AND MATERIALS 4
• FASHION DESIGN AND CLOTH/PRINT TECHNOLOGY PROJECT TOPICS AND MATERIALS 4
• BIOTECHNOLOGY PROJECT TOPICS AND MATERIALS 3
• ARCHEOLOGY PROJECT TOPICS AND MATERIALS 2
• BROADCATING UNDERGRADUATE PROJECT TOPICS, RESEARCH WORKS AND MATERIALS 2
• DENTISTRY PROJECT TOPICS AND MATERIALS 2
• PROJECT TOPICS LIST 1
• BANANA FLAVOURED 1
• INTEGRATED SCIENCE PROJECT TOPICS AND MATERIALS 1
• FEASIBILITY REPORT AND BUSINESS PLAN 0
• PAEDIATRIC PROJECT TOPICS AND MATERIALS 0

All undertaking works, records and reports posted on this website, modishproject.com are the property/copyright of their individual proprietors. They are for research reference/direction purposes and the works are publicly supported. Do not present another person’s work as your own to maintain a strategic distance from counterfeiting its results. Use it as a guide and not to duplicate the work in exactly the same words (verbatim). modishproject.com is a vault of exploration works simply like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and numerous different stages where clients transfer works. The paid membership on modishproject.com is a method by which the site is kept up to help Open Education. In the event that you see your work posted here, and you need it to be eliminated/credited, it would be ideal if you call us on +2348053692035 or send us a mail along with the web address linked to the work, to [email protected] . We will answer to and honor each solicitation. Kindly note notification it might take up to 24 - 48 hours to handle your solicitation.

• Terms of Use

• BSc/HND Project Topics
• MSc/PhD Project Topics
• Source Codes
• Project Ideas

Mechanical Engineering Final Year Project Research Topics

Mechanical Engineering Project Topic: When a research goes mechanical, it definitely goes technical. Mechanical engineering project topics are practical project topics; that is to say that, apart from just choosing the research topics and having it approved for research a lot of things has to be put in place. One of the essential procedures in mechanical engineering research is project topic defense. Defending a project topic in mechanical engineering and getting a green flag marks the beginning the research. Choosing a project topic in mechanical engineering requires that you consider the problem you want to solve, the solution you want to bring, the technical know-how needed to establish the change as well as the reach of such solution when actually implemented.

Filters: Undergraduate (HND,BSc,BTech) Masters (MSc,MTech) PhD Thesis

Mechanical Engineering Research Project Topics with a index have Instant Download

Quick project topic search, cannot find your topic.. search for the project topic now. it saves time and it is easy.

Download Mechanical Engineering Final Year Research Project Topics - Free Project Topics | Codemint and Research Materials. Get Complete Chapter 1-5 Project Materials and Research Topics for HND, BSc, MSc in Doc & PDF. Final Year Projects and Research Materials on CodeMint

Find Your Department Here

• Washington State University
• Go to wsu twitter
• Go to wsu facebook
• Go to wsu linkedin

New project to produce quick test for wildfire smoke exposure

A Washington State University-led research team is working to develop an inexpensive paper sensor that can rapidly provide information on a person’s smoke exposure during wildfire season.

The researchers, including those from the University of Washington and the University of Georgia, have received a four-year, $1.9 million grant from the Centers for Disease Control and Prevention to develop the sensor. With the increasing number and size of wildfires in recent years, the researchers would like to seek better information on people’s smoke exposure to understand and mitigate its health impacts more effectively.

“Our goal is to quickly identify the exposure onsite in real-time and report it with a smartphone reader, so agencies can quickly identify the exposure level and location and make decisions for a hazard prevention strategy,” said Annie Du, a research professor in WSU’s School of Mechanical and Materials Engineering who is leading the project.

Currently, estimates of a person’s smoke exposure level are not exact. Agencies determine how much smoke a person may be exposed to based on computer models that use regional meteorology, satellite data, air quality sensors in the region, or even personal perceptions of smoke levels. Those methods sometimes miss the big variations in smoke that can happen in a small area, for instance. They also don’t get a person’s specific exposure levels to specific chemicals.

There are blood tests to measure smoke exposure, but they’re cumbersome and expensive, requiring that samples be sent to a laboratory for analysis. When fires are in remote areas, getting information on a person’s exposure is even more difficult.

Du along with her colleagues have developed a paper biosensor that uses a single-atom artificial enzyme called a nanozyme, to detect and amplify the signal from wildfire smoke biomarkers in blood or urine. Most paper sensors, such as COVID tests, use tiny gold nanoparticles to detect antibodies or viruses.

Unlike the COVID test strip, which only determines whether or not a person has COVID, their sensor will be able to quantify the amount of smoke as well as which chemicals someone has been exposed to. The sensor will be connected to a smartphone, so that using a phone’s location data, researchers could then determine exactly where smoke levels are most hazardous and identify the chemicals present in different neighborhoods.

As part of the project, the researchers will test blood samples of firefighters during fire season and then validate their sensors with lab results. While they will initially test with wildland firefighters, they hope the technology can someday be used by the public to better assess personal exposure levels.

WSU prepares for possible strike by student employees

Recent news.

WSU celebrates National First‑Gen Day

Guilt not as persuasive if directly tied to personal responsibility

Sculpture dedicated on Pullman campus

WSU and Community Colleges of Spokane announce new pathway into health care professions

Chosen Coug creates ‘foundation of success’ for sister

WSU excellence highlighted in Research Week Awards

Help | Advanced Search

Computer Science > Artificial Intelligence

Title: ai alignment: a comprehensive survey.

Abstract: AI alignment aims to make AI systems behave in line with human intentions and values. As AI systems grow more capable, the potential large-scale risks associated with misaligned AI systems become salient. Hundreds of AI experts and public figures have expressed concerns about AI risks, arguing that "mitigating the risk of extinction from AI should be a global priority, alongside other societal-scale risks such as pandemics and nuclear war". To provide a comprehensive and up-to-date overview of the alignment field, in this survey paper, we delve into the core concepts, methodology, and practice of alignment. We identify the RICE principles as the key objectives of AI alignment: Robustness, Interpretability, Controllability, and Ethicality. Guided by these four principles, we outline the landscape of current alignment research and decompose them into two key components: forward alignment and backward alignment. The former aims to make AI systems aligned via alignment training, while the latter aims to gain evidence about the systems' alignment and govern them appropriately to avoid exacerbating misalignment risks. Forward alignment and backward alignment form a recurrent process where the alignment of AI systems from the forward process is verified in the backward process, meanwhile providing updated objectives for forward alignment in the next round. On forward alignment, we discuss learning from feedback and learning under distribution shift. On backward alignment, we discuss assurance techniques and governance practices that apply to every stage of AI systems' lifecycle. We also release and continually update the website ( this http URL ) which features tutorials, collections of papers, blog posts, and other resources.

Submission history

Access paper:.

• Download PDF
• Other Formats

References & Citations

• Google Scholar
• Semantic Scholar

BibTeX formatted citation

Bibliographic and Citation Tools

Code, data and media associated with this article, recommenders and search tools.

• Institution

arXivLabs: experimental projects with community collaborators

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs .